A

Direct bolt in will work with factory throw out bearing.

By Paul A on March 20, 2021. 
Was this review helpful to you? yes no
A

No, requires Centerforce or LS1 flat style flywheel.

By Austin W on March 23, 2021. 
Was this review helpful to you? yes no
A

Yes will bolt to a Mustange GT flywheel

By samuel v on March 25, 2021. 
Was this review helpful to you? yes no
A

No marcel, 0.315” thick, yes will work with LM361675

By Carl T on March 30, 2021. 
Was this review helpful to you? yes no
A

This flywheel has bolt pattens for both 11” and 10.4” clutch

By Kenneth H on April 03, 2021. 
Was this review helpful to you? yes no
A

Please call the Centerforce Tech office at (928) 771-8422.

By Rouben S on April 14, 2021. 
Was this review helpful to you? yes no
A

Centerforce disc is designed for use with Centerforce pressure plate. If their disc is the same thickness as ours it may work with other pressure plates.

By Tim W on April 17, 2021. 
Was this review helpful to you? yes no
A

Clutch is rated 550 ft/lbs of torque at the crank.

By christopher w on April 24, 2021. 
Was this review helpful to you? yes no
A

DF388144 is the disc in DF148033, the pressure plate in DF559033 may not work with a 1-1/8"-26 spline disc. Please call the Centerforce Tech office at (928) 771-8422 for infomation.

By MICHAEL R on June 26, 2021. 
Was this review helpful to you? yes no
A

No

By Anthony C on July 04, 2021. 
Was this review helpful to you? yes no
A

Please call the tech line 928-771-8422

By Anthony C on July 04, 2021. 
Was this review helpful to you? yes no
A

1100 ft/lb of torque

By Cole S on July 14, 2021. 
Was this review helpful to you? yes no
A

1100 ft/lb of torque

By Cole S on July 15, 2021. 
Was this review helpful to you? yes no
A

KDF931042 is rated 700 ft/lbs of torque at the crank. This clutch should work well for you.

By Daniel B on August 31, 2021. 
Was this review helpful to you? yes no