Help CenterTrack OrderRegister
Log out
QCan you guys tell me when you had a problem with the length of the flywheel bolts and all 8 of them breaking and how recent if so because I’m going through it with a shop now claiming your product is shawdy and I would love to hear the chance of your guys bolts breaking
A

The bolts are ARP have never seen any brake. Please call the tech line 928-771-8422

By zachary f on October 07, 2021. 
Was this review helpful to you? yes no
QWhat’s the horsepower rating for this clutch
A

Pressure plate when used with a Centerforce DFX disc is rated 620 ft/lbs of torque at the crank.

By malakye s on October 08, 2021. 
Was this review helpful to you? yes no
QI have a new clutch in my car that I installed about 6 months ago. The people I ordered it from said it would work with my hydrolic clutch set up but it doesn't. I need a self adjusting clutch in my car. Are the clutches on here self adjusting? The one they sent me is messing up my transmission because it doesn't completely engage. Also can I use the clutch disk with since it's new with one of your clutches?
A

Please call the tech line 928-771-8422

By Brad F on October 10, 2021. 
Was this review helpful to you? yes no
QClutch #DF559033. Any specs on horsepower and torque? The pressure plate has a different design center than I'm used to. Will this work with a hydraulic throw out bearing? Thanks
A

Rated 491 ft/lbs of torque. Please call the tech line 928-771-8422 for hydraulic bearing help.

By Steve B on October 19, 2021. 
Was this review helpful to you? yes no
QIs the Release Bearing and Pilot Bearing included in the kits?
A

Includes Pressure plate, disc, release and piolt bearings, align tool

By Joshua R on October 21, 2021. 
Was this review helpful to you? yes no
QHow many teeth is on this flywheel? 900250-48 - Centerforce Flywheel
A

Hello, the 900250-48 flywheel is listed as having 164 teeth.

By Rick C on November 03, 2021. 
Was this review helpful to you? yes no
Qwhat number throw out to use with df-148552 clutch ?
A

Hello, Given the information that you have provided it looks like you are looking for bearing Number N1716.

By James h on November 05, 2021. 
Was this review helpful to you? yes no
QWhat is the horsepower rating for this clutch? Would it hold up behind a 383 around 430- 450 horsepower and 450 lb ft of torque?
A

Hello, Our KCFT240916 clutch is rated @ 608-FT/LB of torque. This clutch should be good for your appliction.

By Richard Y on November 09, 2021. 
Was this review helpful to you? yes no
QWould this clutch hold up to a 420-450 hp, 450-480 lbft. small block chevy?
A

Hello, The kdf24916 clutch is rated @ 694-FT/LB of torque. this will be a good choice for your application.

By Richard Y on November 09, 2021. 
Was this review helpful to you? yes no
QWill DF559000 work with McLeod hydraulic throw out bearing #1305
A

Hello,given the info you have provided yes the McLeod hydraulic throw out bearing should work with your application.

By Steve B on December 01, 2021. 
Was this review helpful to you? yes no
QWill any clutch work with pressure plate
A

Hello,That clutch disc part number 323281226 is the disc that is used with our DFX kits.

By Tony Q on December 06, 2021. 
Was this review helpful to you? yes no
QI recently purchased a 2000 corvette base 6 speed. Has a new center force clutch...not sure which one or how to tell but the slave gap wasn't set correctly. What is the gap spec between pressure plate and the slave? ..thanks in advance
A

Hello, The air gap should be 1/8-1/4 of an inch. I f you are out of spec the do make shims that you can install behind the bearing to fine tune the air gap.

By Russell D on December 13, 2021. 
Was this review helpful to you? yes no
QAssuming you never ride the clutch and treat it nicely; How many miles would you get out of this clutch as a daily driver?
A

Hello, Assuming that the Jeep is left stock with stock size tires etc this clutch should wear like the oem clutch set up.

By Chandler R on December 17, 2021. 
Was this review helpful to you? yes no
QIs there a clutch disc in your line up that would work with a stock pp and fw? 5.3 ls with headers and Howard’s rattler cam in 3rd gen camaro 4:10 rear end
A

Hello, we would need more info to help you out with this. please give us a call 800-932-5882.

By Stephen C on December 22, 2021. 
Was this review helpful to you? yes no
QIs the clutch alignment tool included in clutch kit?
A

Yes, the Alignment Tool is included in part CFT918802.

By Fernando L on December 31, 2021. 
Was this review helpful to you? yes no
Qwhat is the procedure for exchanging a flywheel, the one i recived has the wrong bolt pattern
A

If the part was ordered directly from Centerforce, please call (928) 771-8422 and ask for Sales & Tech. They can provide you with an RMA Number to start the return process.If the part was ordered from on of our Wholesale Customers (Summit, Jegs, etc.), please contact them about your return.

By Devin G on January 02, 2022. 
Was this review helpful to you? yes no
QIs anyone available today for a part reference?
A

sure please give us a call 1800-932-5882.

By Nate S on January 30, 2022. 
Was this review helpful to you? yes no
Qwill the 700830 work with my 1992 Toyota Hilux LN-107 3L Diesel
A

Hello, we do not build anything for the 3L Diesel as it is not available in the Us.

By wayne p on February 01, 2022. 
Was this review helpful to you? yes no
Qim looking for the flywheel that goes with this jeep wrangler is : jeep wrangler sports 2001 4.0 L6
A

Hello, We have a couple of flywheels that will work with your Jeep. 1. 400469 is a stock style replacement iron flywheel. 2. 700469 is a heavier billet steel flywheel. Either on of these flywheels wil work with your Jeep and clutch kit.Thank you, Nate Novotney.

By gilbert c on February 11, 2022. 
Was this review helpful to you? yes no
QConverting my 96 Ford Explorer 5.0 to a manual transmission with a M5od-R2 transmission from an 01 4.2 V6 F150. Just wanted to see if your knowledgeable staff could verify this clutch kit is compatible. Thanks
A

Hello,That clutch should be compatible with your swap.Thank you.

By John P on March 09, 2022. 
Was this review helpful to you? yes no